Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble in High Chair Mode...
Lay Seat flat on the floor face down.
1a.
1
Insert 1 x Top Leg into the housing on the
2a.
2
underside of the Seat Base.
2b.
Secure with 1 x 17mm Leg Bolts.
2c.
Repeat for remaining 3 x Top Legs.
Insert 1 x Bottom Leg into the housing connected
3a.
3
to a Top Leg.
3b.
Repeat for remaining 3 x Bottom Legs.
Align one end of the Leg Cross Brace with the
4a.
4
housing located on the inside of the full leg
assembly. Ensure the curve in the bracing is
angled downward.
Secure with 1 x 22mm Leg Bracing Bolt.
4b.
4c.
Repeat for the remaining 3 x Leg Cross Brace
ends.
Flip chair over.
5a.
5
7
Advertisement
