Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To use the Harness...
CAUTION: The harness must be used at all times and be correctly adjusted.
Most injuries from high chairs are caused by falls.
1a.
1
1b.
1c.
1d.
1e.
1f.
NOTE: Use the 5-point harness at all times to ensure that baby is safe and secure while seated.
To remove Seat Pad...
1a.
1
1b.
1c.
2a.
2
2b.
12
Place baby in the seat.
Attach shoulder straps to waist belt.
Position the crotch strap between baby's legs and feed arms through shoulder
straps.
Close buckles. You should hear a 'click' sound.
Adjust sliders for a snug fit ( re-adjust as baby grows).
Check to be sure the harness is securely attached by pulling it away from baby, it
should remain attached.
Follow the earlier steps to remove the Tray and
Crotch Restraint Assembly.
Undo the Harness Buckle.
Remove the Waist Clips from the Shoulder Clips.
Feed the Shoulder Harness Straps back through
the current slots in the Seat Pad.
Repeat the above step for the Waist Straps and
the Crotch Strap.
Advertisement
