7.
Slowly lift the feed unit [A] and set it down against the trimmer unit as shown below.
•
Do not try to pull the feed unit away from the trimmer unit. A harness is still connected
below the feed unit.
8.
Disconnect and remove the sensor bracket [A] (
The feed unit [A] is now completely separated from the trimmer unit.
Trim Positioning Unit
1.
Remove the rear cover.
2.
Remove the top cover.
3.
Remove the door. (Door)
4.
Remove the left upper cover.
5.
Remove the left lower cover.
(Rear
Cover)
(Top
Cover)
(Left Upper
Cover)
(Left Lower
Cover)
2.Replacement and Adjustment
x1).
17