Advertisement
Available languages
Available languages
Replacement
Brush head
Replace Philips Sonicare brush heads every 3 months to achieve optimal
results.
Use only Philips Sonicare replacement brush heads.
Recycling
Do not throw away the appliance with the normal household waste at
the end of its life, but hand it in at an official collection point for recycling.
By doing this, you help to preserve the environment.
Removing the rechargeable battery
Only remove the rechargeable battery when you discard the appliance.
Make sure the battery is completely empty when you remove it.
Please note that this process is not reversible.
To remove the rechargeable battery, you need a towel or cloth, a hammer
and a small flat-head (standard) screwdriver. Observe basic safety
precautions when you follow the procedure outlined below. Be sure to
protect your eyes, hands, fingers, and the surface on which you work.
1
To deplete the rechargeable battery of any charge, remove the
handle from the charger, turn on the Philips Sonicare toothbrush
and let it run until it stops. Repeat this step until you can no longer
turn on the Philips Sonicare toothbrush.
2
Remove and discard the brush head. Cover the entire handle with a
towel or cloth (Fig. 11).
3
Hold the top of the handle with one hand and strike the handle
housing 0.5 inch above the bottom end. Strike firmly with a
hammer on all 4 sides to eject the end cap (Fig. 12).
You may have to repeat this process several times to break
the internal snap connections.
ENGLISH
13
Advertisement
