Advertisement
Available languages
Available languages
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to help you get used to brushing with the Philips Sonicare toothbrush.
This Philips Sonicare toothbrush comes with the Easy-start feature activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
-
To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 1 beep
and the battery level indicator lights up yellow to indicate that the
Easy-start feature has been deactivated.
-
To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear 2 beeps
and the battery level indicator lights up green to indicate that the
Easy-start feature has been activated.
Note: Each of the first 14 brushings must last at least 1 minute to move
through the Easy-start ramp-up cycle properly.
Note: Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Philips Sonicare
toothbrush in removing plaque.
Quadpacer
-
The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth evenly and
thoroughly. This Philips Sonicare toothbrush comes with the Quadpacer
feature activated (Fig. 7).
Charger confirmation
The handle beeps and vibrates briefly when it is placed on the charger
base. This Philips Sonicare toothbrush comes with the charger
confirmation feature activated.
ENGLISH
11
Advertisement
