Arkon CM012 Installation Instructions

Safety Anchor
Installation Instructions
Step 1. Find a safe location on the dash away from Air Bag
deployment zones to place the Friction mount.
Package Contents:
(1) (M012 - Universal beanbag / friction mount
(1) Adhesive safety anchor
(l) Alcohol cleaning pad
No Tools Required for installation.
&
Do not install this mount in an airbag deployment zone.
Step 2. Locate the best viewing position for your portable
navigation device within a safe location on the dash.
Step 3. Position safety anchor behind friction mount with
hook facing towards the windshield.
Step 4. Insert safety anchor into safety anchor loop provided
on the back of the friction mount.
AR/CON"
RESOURCES INC.
The Mobile Mounting Specialists'M
Safety Precautions
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and /
or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Consumer Hotline:
USA
(800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA
I
Made in China
©
Copyright 2008 Arkon Resources, Inc.