Birlea LYNX 2 DOOR SLIDING ROBE WITH MIRROR Assembly Instructions Manual
Hide thumbs
Also See for LYNX 2 DOOR SLIDING ROBE WITH MIRROR:
- Assembly instructions manual (11 pages)
Table of Contents
Advertisement
Quick Links
Vendor: S000139
ASSEMBLY INSTRUCTIONS
LYNX 2 DOOR SLIDING ROBE WITH MIRROR
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR LYNX 2 DOOR
SLIDING ROBE WITH MIRROR.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
CARE & MAINTENANCE:
Assemble in the room of use.
Assemble on a soft, clean surface to prevent damages.
Assembly should be carried out with this item laying flat, not standing upright.
To remove the printed numbers on the pieces, use a moistened cloth.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com
Page 1 of 8
Advertisement
Table of Contents
Related Manuals for Birlea LYNX 2 DOOR SLIDING ROBE WITH MIRROR
Summary of Contents for Birlea LYNX 2 DOOR SLIDING ROBE WITH MIRROR
- Page 1 Vendor: S000139 ASSEMBLY INSTRUCTIONS LYNX 2 DOOR SLIDING ROBE WITH MIRROR IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR LYNX 2 DOOR SLIDING ROBE WITH MIRROR. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. HEALTH & SAFETY: DO NOT use this item if any parts are missing, damaged or worn.
- Page 2 Vendor: S000139 Parts List Hardware List (found in box 2) Part Description Part Description Top Panel 8 x 30 mm Wooden Dowel Shelf Simple Minifix Screw Top Plinth Cam Lock Left Panel Plastic Cap Right Panel 8 x 50 mm Wooden Dowel Shelf Divider 3.5 x 25 mm Screw Back Support...
- Page 3 Vendor: S000139 Step 1: Prepare the parts for assembly using hardware parts A, B, E, G, H, I, J, K, L, M, N and O. You will need to use a small mallet and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Page 3 of 8...
- Page 4 Vendor: S000139 Step 2: Attach the back rails (9) to the back support (7) using hardware parts A, C and K with a small mallet and screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 3: Attach the back support (7) and front support (8) to the base panel (14) using hardware parts C, D and E with a small mallet and a screwdriver (not provided).
- Page 5 Vendor: S000139 Step 4: Attach the shelf (2) using hardware parts C, D and K with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 5: Attach the shelf divider (6) and the top panel (1) using hardware parts C and D with a screwdriver (not provided).
- Page 6 Vendor: S000139 Step 6: Attach the bottom plinths (10) to the right panel (5). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 7: Join the assembled inner frame section to the assembled side frame section using hardware parts C and D with a screwdriver (not provided).
- Page 7 Vendor: S000139 Step 8: Position the hanging rail (18) and attach the left panel (4) using hardware parts C and D with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 9: Position the back panels (13) and attach the bottom runner (17) using hardware part T and a screwdriver (not provided).
- Page 8 • If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any issues with Birlea. • Why don’t you send us photos of your assembled furniture to info@birlea.com...
Need help?
Do you have a question about the LYNX 2 DOOR SLIDING ROBE WITH MIRROR and is the answer not in the manual?
Questions and answers