Birlea LYNX 2 DOOR WARDROBE Assembly Instructions Manual

Advertisement

Quick Links

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR LYNX 2 DOOR WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ASSEMBLY:

Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber into the accessories pack.
HEALTH & SAFETY:
DO NOT use this wardrobe if any parts are missing, damaged or worn.
DO NOT use this wardrobe unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the wardrobe as this will damage base.
Always lift the wardrobe with two people to reposition.
Keep any sharp objects away from the wardrobe.
Rev 02
ASSEMBLY INSTRUCTIONS
LYNX 2 DOOR WARDROBE
www.birlea.com
Vendor: S000139
Page of
1
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LYNX 2 DOOR WARDROBE and is the answer not in the manual?

Questions and answers

Summary of Contents for Birlea LYNX 2 DOOR WARDROBE

  • Page 1 ASSEMBLY INSTRUCTIONS LYNX 2 DOOR WARDROBE IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR LYNX 2 DOOR WARDROBE. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. ASSEMBLY: Assembly should be carried out with this item laying flat, not standing upright.
  • Page 2 Vendor: S000139 Parts List Hardware List Part Descripion Part Descripion Top Panel 8 x 30mm Wooden Dowel Shelf Simple Minifix Screw Base Panel Cam Lock Plinth Plastic Cap Left Panel 4.5 x 45mm Screw Right Panel 3.5 x 25mm Screw Door 3 x 20mm Screw Back Panel...
  • Page 3 Vendor: S000139 Step 1: Prepare these parts for assembly as shown in the diagrams DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 2: Attach the left panel (5) to the shelf (2) and base panel (3) using hardware parts C and D DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 4 Vendor: S000139 Step 3: Attach the plinths (4) to the left panel (5) using hardware parts C DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 4: Attach the right panel (6) to the shelf (2), base panel (3) and plinths (4) using hardware parts C and D DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 5 Vendor: S000139 Step 6: Attach the rail supports (N) to the inside of the side panels using hardware part G. Attach the plastic feet to the base of the plinths (4), left side panel (5) and right side panel (6) using hardware part I DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 6 Then attach hardware part H to the item with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Birlea Furniture advise you use the wall straps provided to further enhance the safety of this product 1°...

Table of Contents