Exit Learn Mode - Master Device; Turn Off Devices; Setting Up Previously Configured Network; Power Up Master Device - Crowcon Detective Net Quick Reference Manual

Exit Learn Mode - Master Device

If no further slaves are required, return to the master and
X
double click the right button.
LED 1 will turn off, LED 4 will continue to flash green and LED
X
2 will now flash green.
Network is now configured.
X

Turn Off Devices

To turn off devices, hold both buttons until all LED's scroll
X
from right to left.

Setting Up Previously Configured Network

Power up master device

Press and hold left button until all LED's scroll from left to
X
right.

Power up slave devices

Press and hold left button until all LED's scroll from left to
X
right.
LED 2 will flash green when network connected.
X
If necessary press any button establish communications -
X
LED2 will flash amber continuously then flash green when
connected.
Repeat this process with all slave units ensuring LED 2
X
flashes green.

Perform Network Connection test

Press & hold both buttons for 1 second on any device.
X
All devices will initiate an alert for 10 seconds.
X