Setting Up A Simple Wireless Network; Turn On Devices; Reset Devices; Toggle Devices (Slave To Master/Master To Slave) - Crowcon Detective Net Quick Reference Manual

Setting Up a Simple Wireless Network

Turn On Devices

Press and hold left button until all LED's scroll from left to
X
right.

Reset Devices

Once powered, press and hold left button for 3 seconds.
X
If device previously configured as a slave, LED 1 will flash 3
X
times to indicate a successful reset.
If device previously configured as a master, LED 1 and LED 4
X
will flash 3 times to indicate a successful reset.

Toggle Devices (Slave to Master/Master to Slave)

A network requires just one master device, to toggle between
master and slave, proceed as follows:
Hold right button for 3 seconds.
X
If toggling from slave to master LED 4 will flash 3 times.
X
If toggling from master to slave LED 1 will flash 3 times.
X

Place Master Device In Learn Mode

Once devices are powered and reset, select the master
X
device.
Double click right button to enter learn mode.
X
LED 1 will continuously flash red and LED 4 will flash green.
X

Learn Slave Device to Master

Select the slave device place 1m apart from master device.
X
Double click right button to enter learn mode.
X
LED 1 will continuously flash red and device will learn
X
automatically.
Once complete LED 1 turns off.
X
LED 2 will flash green to indicate the slave is connected to
X
the master.
Repeat this process for all other slaves to be connected to
X
the network.