Set The Basic Settings - JVC KD-R492M Instruction Manual

GETTING STARTED
3

Set the basic settings

1
Press and hold .
2
Perform 'select an item ( 3 or 4)' operation to select an item
(see the following table).
3 2
Repeat step until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
SYSTEM
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
AM SRC *
ON: Enables AM in source selection. ; OFF: Disables. ( 7)
BUILT-IN AUX *
ON: Enables AUX in source selection. ; OFF: Disables. ( 10)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.
6
ENGLISH
CLOCK
TIME SYNC
CLOCK DISPLAY
ENGLISH
.
РУССКИЙ
Default: XX
ESPANOL
ON: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Data System signal. ; OFF: Cancels.
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
Select the display language for menu and music information if
applicable.
By default, ENGLISH is selected.