Table of Contents
Advertisement
2.5.9
Installing an ASUS PCIE-NVME2-OCuLink card
(for RS720-E9-RS8 only)
To install an ASUS PCIE-NVME2-
OCuLink card to the riser card bracket
2:
1.
Remove the two screws that
secure the riser card bracket 2 to
the chassis.
2.
Remove the screw that secures
the riser card bracket 2 to the
motherboard.
3.
Firmly hold the riser card bracket
2, then pull it up to detach it
from the PCIE3 slot on the
motherboard.
4.
Place the riser card bracket 2 on
a flat and stable surface in the
orientation as shown.
5.
Prepare the ASUS PCIE-
NVME2-OCuLink card.
6.
Install the ASUS PCIE-NVME2-
OCuLink card into the PCIE slot.
7.
Connect the OCuLink cables to
the corresponding slots.
2-42
Riser card bracket 2
OCuLink port 2
OCuLink port 1
Chapter 2: Hardware Information
Advertisement
Table of Contents
