Table of Contents
Advertisement
2.5.5
Installing an ASUS PCIE-NVME4-OCuLink card
(for RS700-E9-RS12 only)
Installing an ASUS PCIE-NVME4-OCuLink card to the riser card bracket on the PCIE1 slot
allows your server system to support four NVME storage devices on Bay 9 to Bay 12.
To install an ASUS PCIE-NVME4-OCuLink card:
1.
Firmly hold the riser card bracket, then pull it up to detach it from the PCIE x24 slot on
the motherboard.
2.
Remove the screw from the metal
cover (A), then remove the metal
cover (B) from the from the riser card
bracket.
3.
Prepare the ASUS PCIE-NVME4-OCuLink card.
4.
Install the replacement ASUS PCIE-
NVME4-OCuLink card into the riser
card bracket (A), then secure it with the
screw (B).
ASUS RS700-E9 Series
PCIE x24 slot
2-27
Advertisement
Table of Contents
