Table of Contents
Advertisement
2.5.7
Installing an ASUS PIKE II card
To install an ASUS PIKE II card to the riser card bracket 1:
1.
Remove the screw that secures
the riser card bracket 1 to the
chassis.
2.
Firmly hold the riser card bracket 1, then pull it up to detach it from the PCIE1 slot on
the motherboard.
Riser card bracket 1
3.
Remove the screw from the
metal cover (A), then remove the
metal cover (B) from the riser
card bracket 1.
ASUS RS720-E9-RS8/RS8-G
Metal cover
2-37
Advertisement
Table of Contents
