Table of Contents
Advertisement
2.5.6
Installing ASUS PCIE-NVME2-OCuLink cards to the
butterfly riser card bracket
(optional for RS700-E9-RS12)
You can install additional ASUS PCIE-NVME2-OCuLink cards to your RS700-E9-RS12
system via the pre-installed butterfly riser card bracket on the PCIE2 slot to support NVME
storages on Bay 5 to Bay 8.
To install ASUS PCIE-NVME2-OCuLink cards to the butterfly riser card bracket:
1.
Remove the screw that secures the butterfly riser card bracket to the chassis.
2.
Firmly hold the butterfly riser card bracket, then pull it up to detach it from the PCIE x16
slot on the motherboard.
ASUS RS700-E9 Series
2-27
Advertisement
Table of Contents
