Wiring Instructions And Fuse Protection; Mx - Complete Control Equipment And Uc - Complete Electrical Connection To Terminal Without Controller Unit; Mk - Fans And Heat Exchangers Electrically Connected To Terminal - IV Produkt Envistar Compact Operation And Maintenance

4 Wiring instructions and fuse protection

4.1 MX – Complete control equipment and UC – Complete electrical
connection to terminal without controller unit
Safety switch
Wiring diagrams
Unit functions, power supply and fuse protection
4.2 MK – Fans and heat exchangers electrically connected to terminal
Safety switch
Operation and Maintenance
Envistar Compact
DSEC191101.01.EN
Applies to:
• Code MX - units supplied prewired with complete, integrated Siemens Cli-
matix control equipment.
• Code UC - units supplied without controller unit but with sensor and damper
actuator connected electrically to the terminal block. Fans and heat exchan-
gers are fused and connected electrically to the terminal. The terminal con-
nections are positioned at a shared place in the unit. For further connection
to an external process unit, we recommend using a multi-conductor cable.
A safety switch must be fitted and wired on each power supply.
For wiring diagrams for units with integrated control equipment, refer to the order
unique wiring diagram supplied with the unit or
Diagram).
For power supply to the unit functions and recommended fuses, refer to Order
Unique Documentation at
Diagram), or the product program IV Produkt Designer.
Code MK - units supplied without control equipment but with fans and heat ex-
changers connected electrically to terminals.
Connections to terminal blocks are located on each unit section.
For wiring instructions and recommended fuses, refer to Order Unique Docu-
mentation at docs.ivprodukt.com
A safety switch must be fitted and wired on each power supply.
Continuous product development may give rise to specification changes without notice.
docs.ivprodukt.com
docs.ivprodukt.com (Technical Data and Control
(Terminal Connection and Technical Data).
Page 13
(Control