Ducati PANIGALE V4 2020 Owner's Manual page 108

You can use buttons (1), (2) and (4) to do the
following:
- use buttons (1) and (2) to highlight and select the
riding mode to customise, then press button (4)
to access the customisation page for the
selected riding mode;
- use buttons (1) and (2) to highlight and select
" Back", then press button (4) to go back to
previous page;
- use buttons (1) and (2) to highlight and select
"All Default", press button (4) to reset to default
values for all four Riding Modes.
The parameters linked to a riding mode that can be
customised are DAVC (DTC, DWC, DSC), Engine,
ABS, EBC, DQS, Info Mode and DEFAULT (to reset to
default factory values for the riding mode). The
following indications will be displayed in this page:
-
Back
- DAVC
- Engine
- ABS
- EBC
- DQS
- Info Mode
Back
DAVC
Race
...
Engine
ABS
- Default (visible only if one or more parameters
are different from the "default" ones)
-
Back
Every time button (1) or button (2) is pressed, the
instrument panel allows scrolling all parameters of
the Riding Mode selected; once parameter is
highlighted, press button (4) to enter parameter
customisation page where you can edit the settings
of the parameter.
Any parameter change made is saved and remains in
the memory also after a battery-off. The parameters
1
2 4
Fig 47
107