Introduction - AudioCodes Mediant 500L Hardware Installation Manual

Gateway & session border controller series
Hide thumbs Also See for Mediant 500L:
Table of Contents

Advertisement

CHAPTER 1    Introduction
1

Introduction

This document provides a hardware description of the Mediant 500L Gateway & E-SBC (hereafter
referred to as device) and step-by-step procedures for mounting and cabling the device.
The device supports the following interfaces:
Four Gigabit Ethernet (1000Base-T) LAN ports (RJ-45).
One USB port for optional USB storage services.
Up four ISDN BRI port interfaces, supporting up to eight voice channels as well as PSTN
fallback.
Up to four FXS port interfaces.
Up to four FXO port interfaces.
Serial console port (RJ-45) for device management.
Hardware configurations may change without notice. Currently available hardware
configurations are listed in AudioCodes Price Book. For further enquiries, please
contact your AudioCodes sales representative.
For information on configuring the device, refer to the device's User's Manual.
Mediant 500L Gateway & E-SBC | Hardware Installation Manual
- 1 -

Advertisement

Table of Contents
loading

Table of Contents