CHAPTER 5 Cabling the Device
3.
Plug the power adapter directly into a standard electrical wall outlet.
Powering On or Off the Device
The device is equipped with a power switch, which is located on its rear panel (see
Description
on page 4) for turning it on or off.
➢
To power on the device:
■
Press in the power button; the device receives power, indicated by the lighting of the Power
LED, located on the front panel.
➢
To power off the device:
■
Press out the power button; the device powers off, indicated by the Power LED going off.
Figure 5-16: Cabling to Power using Power Adapter
Mediant 500L Gateway & E-SBC | Hardware Installation Manual
- 23 -
Rear Panel