AudioCodes Mediant 500L Hardware Installation Manual page 12

Gateway & session border controller series

Hide thumbs Also See for Mediant 500L:

Table of Contents

CHAPTER 4 Mounting the Device

Make sure that you attach the shelf's side brackets (left and right) at the same height

level in the rack so that the shelf is in a horizontal position.

Attach the shelf to the rack posts using four standard 19-inch rack bolts (not supplied).

Place the device on the shelf so that the device's front panel faces the front of the rack and the

device's four anti-slide rubber legs (located on the bottom of the device) fit into the four square

openings on the shelf, as shown in the following figure (viewed from underneath):

Mediant 500L Gateway & E-SBC | Hardware Installation Manual

Figure 4-2:

Positioning Shelf in Rack

- 7 -

Table of Contents