AudioCodes Mediant 500L Hardware Installation Manual page 27

CHAPTER 5 Cabling the Device
➢
To connect the device to the power supply using the power adapter:
1. Insert the relevant AC plug into the housing power adapter:
a. Insert the top part of the plug into the upper part of the housing slot (1).
b. Press down on the bottom part of the plug until a "click" sound is heard, indicating that the
plug is securely inserted in the housing slot. To remove the plug, push and slide down the
OPEN plug release lever (3).
2. Insert the DC plug (5) located at the end of the power cord (4) of the power adapter into the
device's power socket located on the rear panel.
Table 5-4: Power Adapter with Interchangeable Plugs
Item
1
2
3
4
5
Figure 5-15: Inserting Plug into Power Adapter
Mediant 500L Gateway & E-SBC | Hardware Installation Manual
Description
Plug slot
Plug lock
Plug release lever
DC power cord
DC power plug
- 22 -