Touchpad - HP ENVY x360 15 Maintenance And Service Manual

Touchpad

Table 5-14 Touchpad spare part information
Description
Touchpad
Before removing the touchpad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the touchpad:
1. Release the ZIF connector (1) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the system board.
2. Remove the four Phillips M1.5×2.7 screws (2) that secure the touchpad and touchpad bracket to
the keyboard/top cover.
3. Remove the touchpad bracket (3).
The touchpad bracket is available using spare part number L89791-001.
4. Release the grounding tape (4) that secures the touchpad to the keyboard/top cover.
5. Remove the three Phillips M1.6×2.5 broad head screws (5) that secure the touchpad to the keyboard/
top cover.
Bottom cover on page
Battery on page 49).
25).
Component replacement procedures
Spare part number
L93186-001
51