HP ENVY x360 15 Maintenance And Service Manual page 50

f. Remove the display panel assembly (3).
The display panel assembly is available using spare part numbers L93183-001 (15.6 in, FHD, 400 nit
display panel assembly) and L93181-001 (15.6 in, FHD, 250 nit display panel assembly).
11. If it is necessary to replace the webcam module and webcam module cable, follow these steps:
a. Remove the display panel assembly.
b. Disconnect the webcam module cable (1) from the touchscreen board.
c. Release the webcam module cable from the retention clips (2) built into the display panel assembly.
d. Detach the webcam module cable (3) from the display panel. (The webcam module cable is attached
to the display panel with double-sided adhesive.)
e. Detach the webcam module (4) from the display panel. (The webcam module is attached to
the display panel with double-sided adhesive.)
42 Chapter 5 Removal and replacement procedures