Additional Country-Specific Ieee Notices - Dell MXG610s Setup Manual

LED
FC port status LED

Additional country-specific IEEE notices

Figure 12. Croatia
14 MXG610s Setup Guide
Description
• Blinking blue—Module is being
identified.
• Both off—No light or signal carrier—no
module, no cable—for the media
interface
• Solid amber—Receiving light or signal
carrier, but not yet online
• Slow flashing amber, 2-second intervals
—Disabled; results of diagnostics or the
portdisable command.
• Fast flashing amber, 1/2-second
intervals—Error occurred, fault with
port.
• Solid green—Online; connected with
external device over cable
• Slow flashing green, 2-second intervals
—Online but segmented; Loopback
cable or incompatible switch.
• Fast flashing green, 1/2-second intervals
—Internal loopback, diagnostic.
• Flickering green—Online and frames
flowing through the port.