Important Safeguards - Russell Hobbs 24661-56 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
To avoid injury, take care handling the blades, emptying the jug, and
cleaning.
h Do not add hot liquid (over 40°C), as it may be ejected due to sudden
steaming.
c Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualified, to avoid hazard.
L Don't put the motor unit in liquid.
Don't use the appliance for any purpose other than those described in these instructions.
Don't use the appliance if it's damaged or malfunctions.
Don't run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off
for at least 3 minutes, to let the motor cool.
DIAGRAMS
1.
Switch
2.
Motor unit
3.
Processing lid
4.
Storage lid
USING
Don't try to chip ice, don't try to chop raw meat, and take great care with the blades.
Don't fill above max.
Don't process hard foods – i.e. anything you can't cut easily with a kitchen knife.
Don't chop big bits – maximum 18mm cubes.
1.
Unplug the appliance.
2.
Lift the motor unit off the bowl. Lift the processing lid off the bowl.
3.
Lower the blade unit over the spindle in the bottom of the bowl. You may have to turn it
slightly, to fit over the flanges on the spindle. It's spring-loaded, so you'll feel some
resistance as you push it down.
4.
Put the food in the bowl.
5.
Align the central hole in the processing lid with the top of the blade unit, and lower the lid
on to the bowl.
HOUSEHOLD USE ONLY
5.
6.
7.
Spindle
8.
3
Blade unit
Bowl
Flanges
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE

Advertisement

Table of Contents
loading

Table of Contents