Important Safeguards; General Operation - Russell Hobbs 25180-56 Manual

Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been supervised/
instructed and understand the hazards involved. Children must not use or play
with the appliance.Keep the appliance and cable out of reach of children.
c To avoid injury, take care handling the blades, emptying the jug, and cleaning.
h Don't add hot liquid (over 40°C), as it may be ejected due to sudden steaming.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don't leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
• Don't put the motor unit in liquid.
• Switch off (0) before fitting the jug to the motor unit.
• Switch off (0), and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
• Don't put utensils into the jug while the appliance is plugged in.
• Don't use accessories or attachments other than those we supply.
• Don't use the appliance for any purpose other than those described in these instructions.
• Don't operate the appliance if it's damaged or malfunctions.
• Don't run the motor continuously for more than 1 minute, it may overheat. After 1 minute switch off
for at least 2 minutes, to recover.
PARTS
1. Speed control
2. Gauge
3. Motor unit
4. Spindle
5. Blender jug
6. Bowl
BEFORE USING FOR THE FIRST TIME
Turn to "CARE AND MAINTENANCE" and clean the appliance, to remove manufacturing dust, etc.
GAUGE
The gauge shows the speed of the blade in rpm (revolutions per minute).
The top row of figures show the speed with the jug or bowl empty.
The bottom row of figures show the speed with the jug or bowl full (to the max mark).

GENERAL OPERATION

1. Sit the motor unit on a dry, firm, level surface.
2. Route the cable so it doesn't overhang, and won't trip or catch.
3. Assemble the unit, and fit any accessories requried according to how you want to use it.
HOUSEHOLD USE ONLY
7. Drive shaft
8. Chopping blade
9. Mixer attachment
10. Creamer attachment
11. Tab
12. Lid
4
13. Tube
14. Pusher
15. Disc
16. Cap
` dishwasher safe