Dahua D Series User Manual page 15

Table 3-5 Model D (2) and Model D (3) installation item list
No. Item
①
Self-tapping screw
④
Expansion bolt
Step 1 Drill screw holes on the mounting surface⑤, then insert expansion bolts④ in the screw
holes.
Step 2 Align the screw holes on the pedestal③ to those on the mounting surface⑤, then put
in and fasten the supplied self-tapping screws① to attach the pedestal③ to the
mounting surface.
Step 3 Adjust the location of the device② on the pedestal③ and fasten the locking screw to
attach the device on the pedestal③.
No. Item
②
Device
⑤
Mounting surface
No. Item
③
Pedestal
— —
Installation 9