Table of Contents
Advertisement
Product Overview
The SpeedStream driver software provides high-speed connectivity using
Asynchronous Transfer Mode (ATM) over an Asymmetric Digital
Subscriber Line (ADSL). This software is designed to be installed on a
3000 series ADSL Internal Modem. Once it is installed, a modem icon is
added to the taskbar and the status of the internal modem can be seen by
clicking on the modem icon.
Before You Begin
The following sections contain information that is essential for you to
know before you install the hardware and software for your 3000 series
modem. Please read these sections carefully.
Checking the Operating System
Before beginning the installation, you must determine what operating
system is installed on your machine:
From the
1
double-click the
In the System applet, click the
2
Note the type of Windows operating system (95, 95A, 95B, 98, or
3
NT) and the version number.
Refer to Table 1 for installation requirements that are specific to your
machine's operating system.
Windows 95/95A/95B
Efficient Networks, Inc.
menu, point to
Start
System
Table 1
• Minimum of 16 Mbytes RAM, 32 Mbytes
recommended
• Pentium-class processor required
• The PCI bus must support bus mastering.
and click
Settings
icon.
tab.
General
System Requirements
Introduction
Control Panel
Product Overview
; then
3
Advertisement
Table of Contents
