Table of Contents
Advertisement
Click the
10
Setting up a PPP Connection
After installing the PPP software, you may be required by your service
provider to configure the IP address before you connect using Dial-Up
Networking. If so, following your service provider's instructions to
configure your IP address, then follow the procedure below to create a
connection.
Creating a PPP Connection
Double-click the
1
double-click the
You will see an icon for the ADSL PPP connection that was defined
2
when you installed the driver. Double-click on the connection icon.
Enter a password.
3
Select the
4
A modem icon will then appear on the taskbar when the connection
5
has been established.
Using SpeedStream with
Multiple User Profiles
If your system was configured with multiple user profiles before the
modem was installed, the SpeedStream connection will only be visible to
the user who installed it. To copy the connection to other users profiles,
copy all files in your Dial-Up Networking folder with a .dun extension to
c:\. Then login as each individual user and copy the .dun files to the
Dial-Up Networking folder.
22
Installing PPP Software
button to complete the configuration.
Finish
My Computer
Dial-Up Networking
button to create the connection.
Connect
icon on your desktop; then
icon.
Efficient Networks, Inc.
Advertisement
Table of Contents
