Table of Contents
Advertisement
In the browse list, double-click on the CD-ROM drive letter,
5-a
then select the
Click
5-b
The Add New Hardware Wizard states that "
6
install the best driver for this device.
copy the driver files from your CD-ROM.
Next you may see the
7
On the
8
list and select
Next, configuration dialog boxes will be presented. Use your service
9
provider's instructions to set the parameters. Click the
to complete the configuration.
As the files are being copied, you may be prompted for the Windows
98 CD. If so, insert the CD and click
Click the
10
driver installation is complete, you will be prompted to restart
Windows. Click
When the system comes back up, you may need to configure the
11
Internet Protocol (IP) address for your connection. Refer to the
procedure below.
Configuring the IP Address in
Windows 95/98
When using the CIP/1483 driver, you may need to configure an Internet
Protocol (IP) address that will be used to identify your computer on the
network.
30
CIP/1483 Driver Installation
W95-98
on the Add New Hardware Wizard dialog box.
Next
Insert Disk
dialog box, pull down the "
Copying Files
<drive>: W95-98\Cip-1483
button to complete the configuration. When the
Finish
.
Yes
folder and
Cip-1483
Windows is now ready to
" Click
Next
dialog box. Click
. Click
.
OK
and click
OK
. Windows will then
.
OK
Copy files from:
.
OK
Finish
button
Efficient Networks, Inc.
.
"
Advertisement
Table of Contents
