Appliance Installation; C13-To-C14 Connector, 6 Ft, 14 Awg Power Cables; Rack Rails; Identifying Rail Parts - IBM Slicestor 2212 Appliance Manual

Figure 6. 8×Cone washers for M5
Figure 7. 2×C13-to-C14 connector, 6 ft, 14 AWG power cables
Figure 8. 2×Rack rails

Appliance installation

Attention: Allow the enclosure assembly to acclimate to room temperature before installation. Disk
drives should be stored at room temperature for at least 2 hours before use.
Identify the sections of the rack rails
The appliance package has two rail assemblies in the mounting kit with three sections, as shown in the
following figure:
Figure 9. Identifying rail parts
v An inner appliance rail that secures directly to the appliance.
v Each inner rail has a locking tab.
9
Chapter 4. Install the appliance into a rack