Rear Of Appliance - IBM Slicestor 2212 Appliance Manual

Figure 18. Rear of appliance
2. The Ethernet connections are located just to the right of the center of the appliance and are next to
each other. They are labeled ETH0 on the left and ETH1 on the right. Connect a standard Ethernet
cable to the left Ethernet port.
3. Press the power button that is on the lower left corner of the appliance front panel.
4. To ensure that the power is on, verify that the power and network link lights are lit and listen for
running fans, as shown in the following figure.
Figure 19. Front of appliance
14
IBM Cloud Object Storage System: Slicestor 2212 Appliance Manual 3409-S00/3401-S00/3403-S00