Field Setting - Daikin VRV II Series Design, Installation & Testing Instructions

Si39-303
4.4

Field Setting

4.4.1 Field Setting from Remote Controller
Individual function of indoor unit can be changed from the remote controller. At the time of
installation or after service inspection / repair, make the local setting in accordance with the
following description.
Wrong setting may cause malfunction.
(When optional accessory is mounted on the indoor unit, setting for the indoor unit may be
required to change. Refer to information in the option handbook.)
4.4.1.1 Wired Remote Controller <BRC1A61, 62>
1. When in the normal mode, push the
2. Select the desired "mode No." with the
3. During group control and you want to set by each individual indoor unit (when mode No. 20,
4. Push the
5. Push the
6. Push the timer
7. Push the
(Example)
When setting the filter sign time to "Filter Dirtiness-High" in all group unit setting, set the Mode
No. to "10", Mode setting No. to "0" and setting position No. to "02".
General Information
enters the "field set mode."
21, 22, 23, 25 has been selected), push the time mode
unit No." to be set.
Note: This operation is not required when setting as a group.
button and select the first code No.
button and select the second code No.
button one time and "define" the currently set contents.
button to return to the normal mode.
button for 4 seconds or more, and operation then
button.
button and select the "indoor
Test Operation
67