Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
base
cover.
Procedure
1. Peel the tape off the heat sink.
2. Disconnect the fan cable from the system board. Note the cable routing and remove the fan cable and the antenna cable from the
routing guides on the fan.
3. Peel the tapes off the fan.
4. Remove the two screws (M2x3) that secure the fan to the palm-rest and keyboard assembly.
5. Lift the fan off the palm-rest and keyboard assembly.
30
Removing the fan
computer. After working inside your computer, follow the instructions in
Removing the fan
16
After
Advertisement
Table of Contents
