Replacing The Base Cover; Procedure - Dell Inspiron 5485 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

NOTE: Steps 1 and 2 are applicable only if you have disconnected the battery prior to removing other components from
your computer.
1. Connect the battery cable to the system board.
2. Adhere the tape that secures the battery cable connection to the system board.
3. Adhere the tape that secures the battery cable to the system board.
4. Align the base cover with the palm-rest and keyboard assembly.
5. Snap the base cover into place.

Replacing the base cover

computer. After working inside your computer, follow the instructions in After
Replacing the base cover
7
17