Advertisement
Step 2: Mounting the Heatsinks/Lightstrips to the Frame
A. Unpack the Heatsink/Lightstrips from the shipping package
SEE IMPORTANT NOTE AT TOP OF PAGE 1, REGARDING REMOVING
HEATSINKS/LIGHTSTRIPS FROM PACKING FOAM
B. Find the bag marked, "Heatsink Installation Hardware" . When you have everything
together it should look like this:
C. Grab one screw, one nylon washer and one T-nut and insert through each end of the
PCB heatsink like this:
IMPORTANTE NOTE: The nylon washer is inserted between the bolt head and the
PCB. The "nipple" on the T-Nut faces the screw you will be fastening it to.
Advertisement
