Dank Light EZ-Connect DIY Grow Light Kit Assembly Instructions Manual page 4

We will come back to this step a little later.
E. Mount the Universal Driver Mount to the Frame:
a. From the "Universal Driver Mount Installation Hardware" bag find the
4 x ¾" bolts and 4 black t-nuts.
b. In the larger hole at the very end of the T-slot extrusion place the ¾"
screw through the hole and thread it into a T-nut like this:
c. Now simply slide the Universal Driver mount bars onto both of your
Frame Extrusions.
NOTE: You will need to unbolt one side of your driver(s) to slide the
extrusion in if you have previously assembled your driver to the Universal
Driver mount.