Page 1
Port Physical Characteristics Configuration Guide Model: S5500-48T8SP...
Page 2
S5500-48T8SP PORT PHYSICAL CHARACTERISTICS CONFIGURATION GUIDE Contents Chapter 1 Port Physical Characteristics Configuration ...............1 1.1 Configuring the Ethernet Interface ..................1 1.1.1 Selecting Ethernet Interface ..................1 1.1.2 Configuring Rate ......................1 1.1.3 Configuring Flow Control on the Interface ..............1 www.fs.com - I -...
Page 3
S5500-48T8SP PORT PHYSICAL CHARACTERISTICS CONFIGURATION GUIDE Chapter 1 Port Physical Characteristics Configuration 1.1 Configuring the Ethernet Interface The section describes how to configure the Ethernet interface. The switch supports the10Mbps Ethernet and the 100Mbps fastEthernet. The detailed configuration is shown as follows.
Page 4
S5500-48T8SP PORT PHYSICAL CHARACTERISTICS CONFIGURATION GUIDE flow-control on/off Enable or disable the flow control on the interface. no flow-control Resume the default settings. The default settings have no flow control. www.fs.com - 2 -...
Need help?
Do you have a question about the S5500-48T8SP and is the answer not in the manual?
Questions and answers