Subscribe to Our Youtube Channel
Related Manuals for FS S3150-8T2F P
Summary of Contents for FS S3150-8T2F P
- Page 1 PoE+ Series Switches Reset and Recovery System Configuration Guide Models: S3150-8T2FP S3260-8T2FP S3260-16T4FP S3400-24T4FP S3400-48T4SP S5500-48T8SP...
- Page 2 POE+ SERIES SWITCHES RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE Contents 1. Configuration Considerations................................1 2. Network Topology....................................1 3. Operation Steps.......................................1 3.1 Connection Equipment................................1 3.2 Download Configuration Software............................1 3.3 Switch on and Use Login Software.............................1 3.4 Restoration System..................................2 3.5 Switch to Factory Reset................................3 www.fs.com...
- Page 3 3.3 Switch on and Use Login Software #Energizing the switch, then open the installed login software, select the serial port of login mode, port through the device manager to determine. Baud rate :115200, Data bits: 8, Parity: None, Stop bits: 1. (Reference below) www.fs.com...
- Page 4 If it displays an unrecognized USB device, please download and install the corresponding driver. 3.4 Restoration System Please use Ctrl + P to enter the monitor # interface when restarting the switch, then configure the switch IP address. monitor#ip address 192.168.1.1 255.255.255.0 * Set PC IP address www.fs.com...
- Page 5 * Then start upgrading the system: run copy tftp flash Monitor#copy tftp flash //From ftp to flash Source file name[ ]? FS-S1400-24T4F-2.2.0C.bin //Firmware file name Remote-server ip address[ ]? 192.168.1.2 //TFTP Server IP address Destination file name[FS-S1400-24T4F-2.2.0C.bin]? //Switch.bin When prompted: TFTP: successfulfully sent ...
- Page 6 S3910 SERIES SWITCHES DATASHEET www.fs.com...
Need help?
Do you have a question about the S3150-8T2F P and is the answer not in the manual?
Questions and answers