Veris iScan EC-OM Operating Instructions Manual page 5

V-Sense Controller and cables will be attached to iScan module AFTER iScan module is attached to
toolbar. After the V-Sense Controller is mounted on the iScan it can remain on the implement due to
weatherproofing, unless opened by operator and lid seal is damaged. If the implement is stored outside for
long-term storage, remove Controller and store it indoors.
Figure 3 iScan EC-OM
Figure 5 V-Sense Controller (rear)
OM Comm
Serial communication to PC,
and external GPS input
Figure 6 V-Sense Controller (front)
On/Off
3A Fuse
Turns power to
V-Sense
Controller
On/Off
Figure 4 V-Sense Controller
Power Indicator
Indicates when power to
the controller is on
12V Power
Power cord shipped with the unit that connects to
the available 12V system or optional battery pack
Bluetooth
Depth Sensor
Antenna
2-2
Pub# OM22-iScan EC-OM
Optic Power
Delivers power to
Optical sensor with
supplied cable
EC Signal
U3 pH Comm port (not
used on EC-OM units)