Download Print this page

Veris iScan EC-OM Operating Instructions Manual page 4

Advertisement

The iScan electronics kit includes the items shown below
EC test box
SoilViewer
Software
OM Reference
Block
Keep all diagnostics and operations manual with system when mapping.
Figure 2
Section 2
V-Sense Controller and Electronics Overview
Figure 1
Note: V-SENSE controllers manufactured after
9/01/2016 contain an internal Garmin 15x GPS. No
external GPS is provided on these units, however
external GPS receivers can be used. The controller will
automatically give preference to any external GPS
source connected to the GPS input. If no external
connection is recognized, the controller will
automatically source the internal GPS for signal.
The use of an external GPS requires the correct
settings. The GPS needs to output only two NEMA
strings (GGA and VTG OR RMC). The system will not
run with more than two strings. The strings need to
output at 4800 baud and 1Hz refresh rate.
2-1
Pub# OM22-iScan EC-OM
USB Serial Adapter
(not incl on
implement-mounted
iScans)
EC Test Load
OM Test Load

Advertisement

loading