Te Pari Racewell HD3 Quick Setup Manual page 6

Check and set the following options:
The other entries should already contain the correct values.
When the entries are set, press the escape key to return to the main screen.
If using Te Pari ISL600 or Iconix loadars -
To ensure accuracy when using the XR or ID3000 scales with Te Pari ISL600 or Iconix load bars the sensitivity and
load bar capacities must be checked and changed if required.
Press the
For Te Pari ISL600 load bars
For Iconix IC2000 600 or 1000mm load bars
For Iconix IC3000 1000mm load bars
When the entries are set, press the escape key to return to the main screen.
To start automatic drafting
Select auto on the Racewell Handler to start operation.
TE PARI
PRODUCTS Ltd
www.tepari.com
67 Humber Street, PO Box 25, Oamaru, 9400,
New Zealand Freephone: 0800 837 274
Australia Freephone: 1800 650 682
Arrow to the
entry in the list
Press the
If you wish to use your indicator in
another situation without the Racewell,
you need to set this back to Automatic.
MIN WEIGH TIME: is set to
SETUP and the ESCAPE key together
Press the blue soft key below
the Load Cell Setup
Ensure the
correct values for your model loadbar as shown below,
and change as required.
CAPACITY:
CAPACITY:
CAPACITY:
SCP Command
ENTER
key to select it
1.5 s. And the DELAY: is set to
CELL
screen
CAPACITY: SENSITIVITY:
and
set to 2000.0 kg SENSITIVITY:
2000.0 kg SENSITIVITY:
set to
set to 3000.0 kg SENSITIVITY:
0.0 s.
on the screen to enter
entries have the
set to 3.000 mV/V
1.325
set to mV/V
set to .9941 mV/V
Te Pari Racewell
DR3 Super Drafter