Te Pari Racewell HD3 Quick Setup Manual page 5

Check the serial communication settings
When the entries are set, press the escape key to return to the main screen.
Specialised setup
Press the
Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers
From the
Press the blue soft key below the
page right arrows to scroll across
Press the blue soft key below
SERIAL
Check the values for the entries
alongside
and CON 2 INPUT:
If not set correctly select and change
each of the entries as follows:
CON 1 INPUT:
CON 2 INPUT:
SETUP ESCAPE
and the key together
This displays the
Press the blue soft key below
DAMPING
Arrow to
and press the
Weighing Screen Setup
on the screen
CON 1 INPUT:
EID
– – –
ü
– – EID –
ü
Specialised Setup
on the screen
START WEIGHING:
ENTER key
RS232 9600 bps
–
RS232 – 9600 bps
screen