System Settings - Te Pari Racewell HD3 Quick Setup Manual

The other entries should already contain the correct values, if not, Arrow to them and set them as follows:
ICONS: set to Large Arrows
DRAFT BY: set to Weight
NO EID TIMEOUT:
set to
NO EID DIRECTION: set to
Note - these values may differ depending on your current drafting preferences.
When the entries are set, press the escape key to return to the main screen.

System settings

Press the SETUP
The other entries should already contain the correct values, if not, Arrow to them and set them as follows:
WEIGHT RECORDING: set to
RESOLUTION: set to .5
AUTO ZERO TRACK:
set to
Press the back arrow to return to the
Quick start guide Tru-Test scales on Te Pari Racewell HD3 and HD6 Sheep Handlers
0.0
0
key
Auto
On Net
Weighing Screen Setup
Arrow to and enter the weight
ranges for your 3 drafts in the
FROM and TO columns
Also select the draft direction for
ARROW
each draft in the
Press the blue soft key below
SYSTEM on the screen
Arrow to DAMP SYSTEM:
the ENTER key
Superdamp III (Sheep)
Arrow to the
entry in the list
Press the ENTER key to select it
column.
and press