Te Pari EasyDose Quick Start Manual

EasyDose
GUN
Quick Start Guide
Dose rate
10 / 110
cc lb
Power Button
Click once to turn on, press and hold momentarily to turn off.
Prime Button
Push this button and pull the trigger to fill the barrel. Point the Gun up to
expel any air in the barrel. This gives manual control of the piston. Press P
button again for mPrime (Micro prime). This is a slower speed allowing fine
mPrime
control. Click again to exit this mode.
Menu Button
Dose Mode: You can use the arrow keys to adjust the dose by volume or
Dose mode
volume
weight. If you select Weight then input the dose units and dose rate.
weight
Piston Speed: A further press of this button allows you to adjust the
delivery and refill speed. Use the arrow keys to change the speed up or
down to suit.
Sound Alert: This setting turns on or off the sound alert at the end of each
dose
Dose Delay: This setting prevents double dosing if you accidentally pull the
trigger twice by accident. Set to 1s, 2s, or 3s for a forced delay between
0 1s 2s 3s
doses.
Multi Dose: If you turn this feature ON any dose will be limited to a max
Multi Dose
of 10ml. A dose larger than 10ml will be automatically be split into equal
ON OFF
doses.
Barrel change: Use the Arrow key to select the TICK and follow the
prompts to change the barrel and piston.
Statistics button
Push to see the amount of product administered and number of doses.
Up and Down buttons
Push these buttons to adjust the Dose Volume or Weight