Husqvarna FS7000 DL Operator's Manual page 22

1-Speed gearbox model
Each saw model with single speed gearbox, as delivered from
the factory is configured to operate with one specific blade
size inside the specific blade guard installed on the machine.
If a blade size must be changed to another size, within
available sizes, then the blade drive configuration must be
changed.
For information regarding full range of blade sizes available,
contact your local sales or service provider.
If changing from a small to a very large diamond blade or vice
versa on a machine with a single speed gearbox, following
must be changed:
• Blade shaft pulleys
• Gearbox pulleys
• Blade shaft flanges
• Belts
• Blade Guard
• Enter gearbox and blade information inside Setup menu 2
on the display to see the specifications for wanted
configuration.
Setup Menu 2
System
information
Gearbox
and
Blade
Information
Press MENU button
to enter Setup Menu
1
See Blade size conversion charts under heading "Blade size
conversion" for specific information on necessary parts.
Contact your Husqvarna dealer to order.
22 –
English
OPERATING
Fault
Codes
Calibrate
E-track
Example: FS7000 DL 1-Speed gearbox model
To change from 20"/500mm drive to a 36"/900mm drive:
1 Change engine gearbox pulleys from 4.51"/114,5mm
diameter to 3.5"/89mm diameter.
2 Change blade shaft pulleys from 4.17"/106mm diameter
to 5.75"/146mm
3 Change blade shaft flanges (outer and inner) from 4,5"/
114mm to 6"/152,5mm
4 Change blade guard from 20"/500mm to 36"/900mm
5 Change belt from 450"/11430mm to 460"/11684mm
6 Engine speed does not change
ENGINE SPEED / BLADE SIZE (FS 5000 D)
Select
BLADE SHAFT
BLADE FLANGE
LOADED PULLEY
SIZE SIZE
RPM SIZE
14" 4.5" 3200 4.17"
20" 4.5" 2400 4.17"
26" 5" 1870 4.17"
30" 5" 1630 4.78"
36" 6" 1360 5.75"
FS 5000 D
Select
Ø
RPM
Ø
n
min
Ø
350mm 114mm 3200 106mm
500mm 114mm 2400 106mm
650mm 127mm 1870 106mm
750mm 127mm 1630 121,5mm
900mm 152,5mm 1360 146mm
ENGINE SPEED / BLADE SIZE (FS 5000 D)
Select
BLADE SHAFT
BLADE FLANGE
LOADED PULLEY
SIZE SIZE
RPM SIZE
14" 4.5" 3200 4.17"
20" 4.5" 2400 4.17"
26" 5" 1870 4.17"
30" 5" 1630 4.78"
36" 6" 1360 5.75"
ENGINE SPEED
RATED PULLEY
RPM SIZE
3000 6"
3000 4.51"
3000 3.50"
3000 3.50"
3000 3.50"
RPM
n
min
Ø
3000 152,5mm
3000 114,5mm
3000 89mm
3000 89mm
3000 89mm
ENGINE SPEED
RATED PULLEY
RPM SIZE
3000 6"
3000 4.51"
3000 3.50"
3000 3.50"
3000 3.50"