Netio PowerCable 101 Series Manual page 57

Save Changes
Download MIB file
When the SNMP API is enabled, other M2M protocols are disabled. After clicking Save changes, you
will be asked to confirm the deactivation of the other protocols.
Click Confirm to confirm the action or Cancel to return to the SNMP API protocol configuration.
The MIB can be downloade from a device web administrator as described above.
Following standard MIBs are also required:

SNMPv2-SMI

SNMPv2-TC
Monitoring (read)
Object
OID
netioOutputID.1.0
1.3.6.1.4.1.47952.1.1.1.1.1.0
netioOutputName.1.0
1.3.6.1.4.1.47952.1.1.1.2.1.0
netioOutputState.1.0
1.3.6.1.4.1.47952.1.1.1.3.1.0
netioOutputStateString.1.0
1.3.6.1.4.1.47952.1.1.1.4.1.0
netioOutputLoad.1.0
1.3.6.1.4.1.47952.1.1.1.25.1.0
netioOutputEnergy.1.0
1.3.6.1.4.1.47952.1.1.1.26.1.0
netioOutputEnergyStart.1.0
1.3.6.1.4.1.47952.1.1.1.27.1.0
netioOutputCurrent.1.0
1.3.6.1.4.1.47952.1.1.1.28.1.0
netioOutputPowerFactor.1.0
1.3.6.1.4.1.47952.1.1.1.29.1.0
netioVoltage.0
1.3.6.1.4.1.47952.1.2.1.0
netioFrequency.0
1.3.6.1.4.1.47952.1.2.2.0
Saves the changes.
Use this button tu download MIB.
Type
INTEGER
STRING
INTEGER
STRING
INTEGER
INTEGER
DateAndT
ime
INTEGER
INTEGER
INTEGER
INTEGER
Value example
1
output_1 Based on user
defined name
off(0), on(1)
"off", "on"
24 [W]
13 [Wh]
2017-6- Initial date and
23,5:47:3.0,+0: time. UTC based
0 *1
195 [mA]
534 Current power
factor * 1000
239100 Voltage in the
power grid [mV]
49900 Frequency in the
power grid [mHz]
Note
57