Netio PowerCable 101 Series Manual page 12

Electrical measurements
PowerCable measures relevant electrical parameters.
Parameter
Voltage
Frequency
Current
TPF
(True Power Factor)
Output power
Consumption 0 - 4294967296
Quick WiFi connection setup (AP mode installation)
 NETIO PowerCable creates a WiFi network that you connect to with your PC
or mobile phone.
 It then scans for WiFi networks in the vicinity, and lets you choose from a
list and type the password.
 NETIO PowerCable then confirms the connection to the network and
displays the assigned IP address.
 NETIO PowerCable devices can be discovered in the LAN using the
NFC Preconfig
PowerCable can be pre-configured using NFC even without being switched on.
This require a mobile phone with Android system, NFC function and mobile
application „NETIO Mobile 2".
The settings configured over NFC will be applied when the device is powered on.
In this way, it is possible to configure or show:
 Set SSID and password for connecting to WiFi
 Show assigned IP address in DHCP mode
For authentication, the existing password to the web administration "admin" account is used
(default "admin" / "admin").
Range Units
90,0 – 250,0 V
45,0 – 65,0 Hz
0,005 – 16,000 A
0,00 – 1,00 -
0 – 3600 W
Wh
Resolution Accuracy
0,1 <1%
0,1 <1%
0,001 <1%
0,01 <1%
1 <1%
1 <1%
NETIO Discover tool.
12