Table of Contents
Advertisement
Figure 19 – NETIO Discover web interface
To successfully discover the IP address, the controlling system must be in the same LAN as the
PowerCable xxx 101x.
If the discovered IP address belongs to a different address range than that of your WiFi network, we
recommend resetting the device to factory defaults (see chapter 5.3) and then configuring it
according to chapter 5.1.
Figure 20 – Discovering and configuring network parameters using NETIO Discover
To change the IP address, click the value in the MAC address column, uncheck Enable DHCP and
specify the IP address, Subnet mask and Default gateway. After applying the settings, PowerCable
will be accessible at the specified address.
Enter the IP address into a web browser or the NETIO Mobile app and log in to the device.
Note: For MAC or Linux users use the NETIO Discover Multiplatform version.
21
Advertisement
Table of Contents
