Blodgett SN-5G Installation Operating & Maintenance Manual page 16

CLEANING
Weekly, or more often if necessary:
1. Clean exterior with a damp cloth and polish with a soft dry cloth.
2. Use a non-abrasive cleaner to remove discolorations.
3. Clean around burner air mixer and orifice if lint has accumulated. Side cover must
be removed to clean this area.
Monthly:
1. Clean around burner air mixers, louvered panels if grease or lint has accumulated.
Following daily and period maintenance procedures will enhance long-life for your
equipment. Climatic conditions - salt air - may require more thorough and frequent
cleaning otherwise the life of the equipment could be adversely affected.
It is NOT RECOMMENDED to use cleaning agents that are corrosive.
Use of cleaning agents that contain chloride, acids or salts which are corrosive may
cause pitting and corrosion when used over a period of time; this will reduce the life of
the appliance.
Should pitting or corrosion occur, this is not covered by warranty.
Follow the recommended cleaning instructions. Use a mild detergent, warm water and
rinse thoroughly.
NEVER SPRAY WATER INTO ELECTRIC CONTROLS.
16